суббота, 2 февраля 2013 г.

настройка dellorto 17.5

Note: These are rough initial settings ONLY. You MUST properly tune the carb to YOUR bike by testing and riding the bike, to properly determine correct jetting and needle placement. Jetting should be verified by БЂњreadingБЂ« the spark plug (see the for more info on reading your plug).

Use the #90 or #92 main jet, depending on your bikeБЂ™s level of modification. You may need to change this jet further, if you are unable to obtain satisfactory tuning results.

Use the tapered needle (A 8), installed with the clip in the center notch position.

Right screw (idle air mixture bleed screw): 3 and 5/8 turns from fully closed.

Center screw (idle position screw): 4 full turns from fully closed.

(*note: I believe this to be a correct setup on a 50cc race bike- others may differ somewhat)

Initial settings for the 17.5mm carb (left side of carb):

Minimoto Garage - Dell'Orto PHBN 17.5mm Carburetor Setup Guide

1 комментарий:

  1. Я порекомендую всем, кто ищет бизнес-ссуду, мистеру Бенджамину, который помог мне с ссудой в четыре миллиона долларов, чтобы начать свой бизнес, и это было быстро. Когда они получали ссуду, было удивительно, насколько легко с ними было работать. Процесс был быстрым и безопасным. это был определенно положительный опыт. избегайте мошенников здесь и связались с мистером Бенджамином. 247officedept@gmail.com. whatsapp ... + 19893943740. если вы ищете бизнес-кредит.

    ОтветитьУдалить